Eaton BladeUPS


View more photos

Eaton BladeUPS is a 3 phase Double Conversion uninterruptable power quality and power distribution solution, designed specifically for the modern data centre. Eaton BladeUPS is scalable flexible UPS solution that allows you to optimise and mange the total cost of ownership of your power quality and distribution system by scaling and growing with demand, together with optimising your running costs through high efficiency without compromising availability.


Eaton Blade UPS - Datasheet
Eaton Blade UPS - Brochure
Back to Etaon UPS Family


 Specifications :

 Product details
Power Rating 12 kW per UPS Module
Efficiency Up to 98.6%
Heat Dissipation 371W/1266 BTU/hr. at 100% rated load
Cooling Fan cooled, temperature microprocessor monitored; front air entry, rear exhaust
Audible Noise, Normal Operation <60 dBA at 1 meter
Altitude 1000 meters (3300 ft. ASL)
Input Voltage 400 Vac
Voltage Range 400V: 311 to 519 Vac, phase to phase
Frequency Range 50 or 60 Hz, ±5 Hz
Input Current Distortion <5% with IT loads (PFC power supplies)
Input Power Factor >.99 with IT loads (PFC power supplies)
Inrush Current Load dependent
Input Requirements Three-phase, four wire + ground
Bypass Source Same as input, (single feed)
Generator Compatibility Fast sync slew rate for optimum generator synchronisation
Rated Output Voltage 400V: 180 to 240 Vac, Ph to N
Output Configuration Three-phase, four wire + ground
Output Frequency (nominal) 50 or 60 Hz auto-detection on startup
Frequency Regulation 0.1 Hz free running
Load Power Factor Range Lagging: 0.7
Leading: 0.9
Total Output
Voltage Distortion
<3% with IT loads (PFC power supplies)
<5% non-linear or non-PFC power supplies
Battery Type VRLA - AGM
Battery Runtime (Internal) 13 minutes at 50% load
4.7 minutes at 100% load
Battery String Voltage 240 Vdc
Battery Test Automatic battery test standard (remote scheduling capable).
Manual battery test from front display
Battery Recharge Profile ABM three-stage charging technology
Battery Cut-off Voltage Variable from 1.67 VPC at <5 min. runtime
Battery Low Condition Announced with alarm
Extended Battery Capability Yes, add up to four additional 3U battery enclosures
(~34 min at 100% load, >1 hour at 50% load)
Dimensions (HxWxD)

261 (6U) x 442 x 660 mm
Total Chassis Weight without batteries or electronics
Total Chassis Weight with batteries or electronics

46 kg
140 kg
Total UPS Weight without Batteries 61 kg
Total UPS Weight with Batteries 140 kg
EBM Weight 77 kg
Communications and User Interface
Software Compatibility UPS ships with Software Suite CD
X-Slot Bays Two available for the cards listed below
Control panel LCD Two lines by 20 characters
Four menu-driven interface buttons
Four status at a glance LEDs
Multi-language English standard; 20 languages available
Configuration Changes User capable, firmware auto configures
Dry Contact Inputs Two, user configurable
Dry Contact Outputs One, user configurable
Installation User capable, located in the IT racks
Preventative Maintenance User capable, optional factory service available
Corrective Maintenance User capable, optional factory service available
Serviceability Features Hot-swappable batteries
Hot-swappable electronics module
Automated internal maintenance bypass
Auto-configure firmware
Flash firmware upgradeable
EMI IEC 62040
Surge Protection ANSI C62.41, Cat B-3
Hazardous materials (RoHS) EU Directive 2002/95/EC Category 3 (4 of 5)
Standard 12 months
Warranty Repair Factory depot repair or replace
Options and Accessories
Detachable input cord
Detachable input/output cord assembly
Detachable paralleling cord assembly
Extended Battery Modules (EBMs)
3U output sub-distribution module
0U to 3U rack power strips
60 kW BladeUPS Parallel bar
Four-post rail kit
Optional X-Slot Communication Cards
Application Card
Environment Monitoring EMP Environmental Monitoring Probe (requires Web/SNMP card)
IBM eServer™ (i5™, iSeries™, or AS/400), industrial
Relay Interface Card
Parallel Hot Sync Card
Remote Monitoring Modem Card
Remote LCD Display ViewUPS-X
Recommended ePDU
Y032440CD100000 RPM - Rack Power Module (BladeUPS in, 12xC13 + 6xC19 out) 20ft lead
PW107BA0UC08 ePDU - Basic (0U, Dual 16A C20 in, 24xC13+ 8xC19 out) use in addition to RPM
PW107MI0UC08 ePDU - IP Monitored (0U, Dual 16A C20 in, 24xC13+ 8xC19 out) use in addition to RPM



Copyright ©2010-2015 Al-Masder Al-Motataoer Co.  All Rights Reserved  ::  Designed By Al-Masder